True/False
Indicate whether the sentence or statement is true
or false.
|
|
|
1.
|
Equipment designed to open circuits under fault conditions shall have an interrupting
rating suitable for the available voltage and circuit current at the line side of the
equipment.
|
|
|
2.
|
Installations underground in mines are not covered by the
NEC®.
|
|
|
3.
|
At
least two entrances to electrical rooms shall be provided to give access to the working space about
all electrical equipment rated less than 1200 A.
|
|
|
4.
|
Explanatory material appears in the NEC® in Fine Print
Notes.
|
|
|
5.
|
Electric equipment with ventilating openings shall be installed so that openings are
not blocked.
|
Completion
Complete each sentence or
statement.
|
|
|
6.
|
The
first four chapters of the NEC® apply generally unless they are ____________________
by the later chapters.
|
|
|
7.
|
A
conductor’s ____________________ is the amount of amperes it can carry continuously without
exceeding its insulation rating.
|
|
|
8.
|
Boxes
installed within walls that are required to be taken down to gain access are not considered
____________________.
|
|
|
9.
|
The
word ____________________ indicates that an NEC® rule is mandatory.
|
|
|
10.
|
The
two-fold purpose of the NEC® is to protect ____________________ and
____________________ from the dangers associated with the use of electricity.
|
|
|
11.
|
Interpretations and approval of equipment are granted by the
____________________.
|
|
|
12.
|
The
AHJ can permit alternate ____________________ for installation, if they believe the installation is
equally effective at meeting the intended objective.
|
|
|
13.
|
Although done in conformance with the NEC®, all electrical
installations may not be adequate for ____________________ use.
|
|
|
14.
|
____________________ conductors are conductors not encased in a material recognized by
the NEC®.
|
|
|
15.
|
Connectors, couplings, locknuts, and bushings are electrical
____________________.
|
|
|
16.
|
Equipment that has been ____________________ is published in a directory by the
testing lab certifying that it has met established standards.
|
|
|
17.
|
When
not specified, all conductors in the NEC® are considered to be
____________________.
|
|
|
18.
|
All
unused openings in equipment are required to be effectively ____________________.
|
|
|
19.
|
Wire
connectors for use with conductors in direct-burial applications shall be
____________________.
|
|
|
20.
|
Each
____________________ required by the NEC® shall be legibly marked to indicate its
purpose.
|